A construction project can use digital models, cloud software and AI while still losing time to outdated drawings and repeated checks. For Southeast Asia’s building industry, the challenge is making information reliable enough to move between architects, engineers, contractors and building operators without teams having to recreate it at each stage.

Singapore’s regulatory changes are giving that challenge greater urgency. From 1 October 2026, CORENET X Gateway Processes became mandatory for new projects with a gross floor area of at least 5,000 square metres. Smaller projects can continue using CORENET 2.0 for now. The transition places greater emphasis on how project teams prepare and coordinate information, making digital capability part of the practical requirements of project delivery.

Building information modelling, or BIM, provides a way to organise a building’s physical characteristics and associated information in digital models. Its usefulness, however, depends on what happens around those models. Teams need to know which information is current, who maintains it and whether another discipline can use it. A design change that fails to reach the right contractor can still cause delays, regardless of how sophisticated the original model looks.


We look at how Vietnam’s investment landscape is changing beyond manufacturing


The stakes extend beyond construction schedules. Decisions made during design influence how much energy buildings consume throughout their operation. In its 2024 Southeast Asia Energy Outlook, the International Energy Agency projected that cooling would account for almost one-third of the region’s growth in electricity consumption to 2035 under its Stated Policies Scenario. That projection reinforces the importance of assessing building performance before construction and comparing those assumptions with actual operating conditions later.

For Jonathan Ng, Managing Director, Southeast Asia, at Nemetschek Group, the measure of digitalisation is whether it changes project performance. In the interview below, he argues that earlier coordination, reusable information and practical workforce training matter more than software adoption alone. He also distinguishes between AI’s usefulness in defined tasks, such as checking documents, and the professional judgement required to make decisions about construction.

That distinction matters for smaller contractors with limited training time and technology budgets. Their participation affects how well information moves across an entire project. We speak with Ng about the region’s differing adoption priorities, the limits of construction AI and what measurable progress should look like by 2030.

Where is construction digitalisation making meaningful progress across Southeast Asia, and where is it struggling? How do the drivers and barriers differ between Singapore and markets such as Malaysia, Indonesia and Vietnam?

Digitalisation is progressing across Southeast Asia, but each market is starting from a different point and is being shaped by different industry priorities.

Singapore is relatively advanced because regulation, government-led digitalisation and industry capability-building are moving together. CORENET X is a good example of how digital requirements are beginning to influence the way project teams coordinate information much earlier in the process.

Malaysia has built strong BIM awareness and capability, while the next opportunity is to deepen adoption across a broader part of the industry. Indonesia has tremendous potential given the scale of infrastructure and construction activity, although the size and diversity of its ecosystem means implementation can vary considerably between organisations and projects. Vietnam is also developing quickly, supported by growing BIM adoption and a strong focus on building digital capability within both industry and education.

What is interesting is that the same technology can solve very different problems depending on the market. For one company, the priority may be regulatory compliance; for another, it may be reducing coordination effort, improving design quality or managing increasingly complex projects.

In Singapore, the immediate driver is regulatory alignment, mandates like CORENET X are forcing earlier, model-based collaboration. In high-growth markets like Indonesia, Malaysia, and Vietnam, the primary driver is scale and speed: managing massive infrastructure pipelines without proportionally ballooning headcount or design errors. Successful digitalisation happens when it directly solves that local bottleneck.

What separates a construction project that uses digital tools from one that genuinely works more efficiently? Can you share a Southeast Asian example with measurable improvements in costs, completion time or rework – and explain what made the difference?

The difference is whether technology changes the way the project is delivered.

A project can use many digital tools and still carry a lot of manual work, duplicated information and late-stage coordination. The greatest gains tend to come when information created in one part of the project can be trusted and reused elsewhere, and when issues are identified before they become expensive to resolve.

Those gains come from changing the workflow, rather than simply converting an existing process into a digital format. Coordination happens earlier, information is structured more consistently, and issues can be identified before they move further downstream.

A recent regional example is Merdeka 118 in Kuala Lumpur, the world’s second-tallest building, which was taken from early design through delivery in a single connected Archicad model by a Southeast Asian and international design team. The kind of project where reusing trusted information across stages, rather than recreating it, made the real difference.

On the numbers side, early users of our newly released Allplan Max are reporting up to 36 percent faster completion on selected engineering tasks, and more than 2,000 early adopters of Bluebeam Max have reported meaningful productivity gains in design coordination and construction management.

The most useful question for any digital investment is therefore not, “What does the technology do?” but “Which part of the project process does it improve, and can we measure that improvement?”

Can smaller contractors keep pace with the region’s push towards digital construction?

Yes, although the pathway will understandably look different for a smaller contractor than for a large organisation with dedicated technology and BIM teams.

Smaller firms often have to balance digital investment against immediate project demands. Cost matters, but so do training time, internal capacity and confidence that a new system will solve a genuine business problem.

A smaller contractor does not necessarily need to adopt every new technology at once. A strong starting point can be relatively simple – reliable document and version control, consistent project information, the ability to review and exchange digital models, and a small number of people who understand how information moves through the project.

The barrier to entry itself is also changing. A decade ago, running a proper BIM workflow meant investing in servers, several specialist licences and a dedicated technical team, which was practically out of reach for a five- or ten-person practice.

Cloud-based, subscription tools and free viewers have brought a lot of that capability within reach of much smaller studios and contractors, so a boutique practice or a small contractor can now plug into the same open workflows as a much larger firm on the same project.

Once those foundations are in place, automation and AI can be introduced where there is a clear opportunity to reduce repetitive work, improve checking or support better decisions.

Where is AI delivering reliable value in construction today, and where does the hype exceed the evidence?

The most reliable applications of AI today tend to be in areas where there is a large amount of information to process and the task itself is relatively well defined.

That can include searching project information, comparing documents, identifying inconsistencies, supporting model checking, structuring field information or summarising large amounts of project data. These are areas where professionals can spend significant time finding and processing information before they are able to make a decision.

Construction is highly contextual. A recommendation may need to account for safety, regulation, constructability, cost, material availability, site conditions and how the building will ultimately be used. Those considerations still require experienced professionals to interpret the information and take responsibility for the decision.

The quality of the underlying data also matters considerably. AI cannot compensate indefinitely for fragmented, incomplete or poorly structured project information.

A good example is what we’ve just done across Archicad, Allplan and Bluebeam – bringing AI into all three on one shared foundation rather than as a bolted-on feature. In practice, that looks like an assistant that can carry out a multi-step modelling task inside the design software itself, or catch a discrepancy in a drawing set before it reaches the site. Early users are already seeing real-time savings on specific tasks, and in some cases over a third faster, while retaining control.

I see the strongest near-term value in AI helping professionals spend less time searching, checking and processing information, while giving them better information on which to base their judgment.

Construction projects involve many companies using different systems. What stops their data from working together?

Part of the challenge is simply the nature of construction. A major project brings together architects, engineers, contractors, specialist consultants, owners and operators, each with different responsibilities and often different technologies.

The technical ability to exchange a file is therefore only the beginning.

Information also needs to retain its meaning. A building element may appear correctly in a model but still contain incomplete properties, inconsistent classifications or missing information that makes it difficult for another system or project team to use.

There is also a process dimension. Teams need clarity on which information is authoritative, who is responsible for maintaining it, how changes are managed and what information needs to move from one project stage to the next.

This is why interoperability is so important to us at Nemetschek. We have long supported OPEN BIM and open standards because project teams should be able to use specialist technologies appropriate to their discipline while still collaborating around reliable information.

A useful principle is choice at the discipline level and interoperability at the project level.

Ultimately, good interoperability means that information can retain its value as it moves from design through engineering, construction and operations, with less need for teams to recreate or reinterpret it along the way.

How can digital design and building-management tools help Southeast Asian cities respond to heat, cooling demand and flood risk?

Digital tools give project teams an opportunity to understand performance earlier and to continue learning from a building once it is in operation.

At the design stage, models and simulation tools can help teams assess factors such as orientation, shading, solar exposure, ventilation and cooling demand before major decisions are locked in. The same principle can support resilience planning by helping teams understand terrain, drainage and how buildings interact with surrounding infrastructure.

The opportunity becomes more valuable when that information continues into operations.

Building-management systems, sensors and digital asset information can help owners understand how a building is performing in practice: where energy use is higher than expected, how cooling systems are behaving, or whether operational conditions differ from assumptions made during design.

For Southeast Asia, this is especially relevant because the underlying demands are structural: dense, humid cities are already dealing with a growing urban heat-island effect, cooling accounts for a large share of building energy use, and monsoon-driven flooding is a recurring design constraint rather than an edge case. Cities here are managing a harder set of baseline conditions, which is where getting the design-stage assumptions right pays off the most.

The longer-term opportunity is to create a stronger connection between what we predict during design and what we learn during operation. That can help buildings become more efficient and more adaptable over time.

What needs to change in how Southeast Asia trains its construction workforce? How can companies develop digital capabilities while retaining the practical knowledge of experienced engineers, site workers and smaller suppliers?

We need to continue building software skills, but we also need to develop a stronger understanding of the workflows around the software.

The technologies professionals use will continue to evolve. Training should also give people more exposure to multidisciplinary project environments. An architect does not need to perform an engineer’s role, but understanding how an architectural decision affects engineering, construction or operations can make collaboration much more effective.

At the same time, the industry’s practical knowledge is enormously important. Experienced engineers, contractors and site teams often understand risks and constraints that may not be immediately visible in a digital model.

This is also why we have been building education and industry partnerships across Asia. In Southeast Asia, we are working with institutions including ITE and Singapore Polytechnic in Singapore and universities in Vietnam and the Philippines to bring industry workflows closer to the way future professionals are trained. We have also recently expanded this approach into South Korea through our first academic partnership in the market, with the College of Engineering at Kyung Hee University.

The future construction workforce will need both digital fluency and practical judgement. The strongest organisations will find ways to strengthen one without losing the other.

By 2030, what measurable changes would convince you that construction digitalisation has succeeded in Southeast Asia?

By 2030, I would hope we are increasingly measuring digitalisation through project performance rather than technology adoption alone.

I would look at whether coordination errors and requests for information are falling, whether projects are experiencing less design-related rework, whether approval and design cycles are becoming shorter, and whether more issues are being identified before construction begins.

Another important measure will be how effectively information is reused. Information created during design should increasingly support construction and, where relevant, continue into building operations rather than being recreated at every stage.

I would also look at how widely these capabilities have spread. If digital workflows are only working effectively for a small group of large organisations, there will still be significant inefficiency across the wider supply chain.

For me, success by 2030 would mean that the industry talks less about whether it is “digital” and has much clearer evidence of how digital practices are improving the way projects and buildings perform.